General; Location Of Controls - Sony CDX-GT828U Service Manual

• Location of Controls

• CDX-GT828U:
Location of controls and basic operations
Main unit
OFF LIST/
BROWSE
SOURCE
SEEK SEEK
BACK
MODE
PTY REP
AF/TA 1
PUSH ENTER/SOUND/MENU
Front panel removed
RESET
Card remote commander
RM-X154
OFF ATT
SOURCE SOUND MODE
MENU LIST
+
ENTER
–
DSPL/PTY SCRL
REP SHUF
1 2 3
PAUSE
4 5 6
+
VOL
–
8
• CDX-GT870US/GT878US:
Location of controls and basic operations
Main unit
OFF LIST/
BROWSE
SOURCE
SEEK SEEK
BACK
MODE
REP
SCRL 1
PUSH ENTER/SOUND/MENU
Front panel removed
RESET
Card remote commander
RM-X156
OFF ATT
SOURCE SOUND MODE
MENU
LIST
+
ENTER
–
DSPL SCRL
REP SHUF
1 3
PAUSE
4 6
+
VOL
–
8
SECTION 2
OPEN
AUX
SHUF ALBUM DM PAUSE SCRL
2 3 4 5 6 DSPL
This section contains instructions on the location
of controls and basic operations. For details, see
the respective pages.
For USB device operation, see "USB devices" on
page 15, or for optional device (CD/MD changer,
etc.) operation, see "Using optional equipment"
on page 18.
The corresponding buttons on the card remote
commander control the same functions as those
on the unit.
OFF button
To power off; stop the source.
(LIST/BROWSE) button page 10,
13
To list up (Radio); enter the Quick-BrowZer
mode (CD/USB).
Control dial/select button
Rotate to: Adjust volume.
Press to: Enter sound setting/apply a menu
setting.
Press and hold to: Enter menu.
OPEN
AUX
SHUF ALBUM DM PAUSE
2 3 4 5 6 DSPL
This section contains instructions on the location
of controls and basic operations. For details, see
the respective pages.
For USB device operation, see "USB devices" on
page 13, or for optional device (CD/MD changer,
etc.) operation, see "Using optional equipment"
on page 17.
The corresponding buttons on the card remote
commander control the same functions as those
on the unit.
OFF button
To power off; stop the source.
(LIST/BROWSE) button page 10,
13
To list up (Radio); enter the Quick-BrowZer
mode (CD/USB).
Control dial/select button
Rotate to: Adjust volume.
Press to: Enter sound setting/apply a menu
setting.
Press and hold to: Enter menu.
CDX-GT828U/GT870US/GT878US

GENERAL

SOURCE button
To power on; change the source (Radio/CD/
USB/AUX)*.
Display window
USB terminal page 15
To connect to the USB device.
OPEN button page 6, 7
(BACK) button page 10
To return to the previous display.
Receptor for the card remote
commander
SEEK –/+ buttons
CD/USB:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
MODE button page 12, 15
To select the radio band (FM/MW/LW); select
the play mode of ATRAC Audio Device.
AF (Alternative Frequencies)/
TA (Traffic Announcement)/
PTY (Program Type) button page 13, 14
To set AF and TA (press); select PTY (press
and hold) in RDS.
Number buttons
CD/USB:
: REP page 12, 15
: SHUF page 12, 15
/ : ALBUM –/+
To skip albums (press); skip albums
continuously (press and hold).
: DM+ page 4
To activate the DM+ function, set
"DM+ on." To cancel, set "DM+ off."
: PAUSE
To pause playback. To cancel, press again.
Radio:
To receive stored stations (press); store
stations (press and hold).
DSPL (display)/SCRL (scroll) button
page 12
To change display items (press); scroll the
display item (press and hold).
AUX input jack page 18
To connect a portable audio device.
SOURCE button
To power on; change the source (Radio/CD/
USB/AUX)*.
Display window
USB terminal page 13
To connect to the USB device.
OPEN button page 6, 7
(BACK) button page 10
To return to the previous display.
Receptor for the card remote
commander
SEEK –/+ buttons
CD/USB:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
MODE button page 12, 14
To select the radio band (FM/AM)*; select
the play mode of ATRAC Audio Device.
SCRL (scroll) button
To scroll the display item.
Frequency select switch (located on the
bottom of the unit)
See "Frequency select switch" in the
supplied installation/connections manual.
Number buttons
CD/USB:
: REP page 12, 14
: SHUF page 12, 14
/ : ALBUM –/+
To skip albums (press); skip albums
continuously (press and hold).
: DM+ page 4
To activate the DM+ function, set
"DM+ on." To cancel, set "DM+ off."
PAUSE
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
DSPL (display) button page 12
To change display items.
AUX input jack page 17
To connect a portable audio device.
This section is extracted
from instruction manual.
RESET button page 5
(eject) button page 7
To eject the disc.
Disc slot page 7
To insert the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 5).
MENU button
To enter menu.
ENTER button
To apply a setting.
( )/ ( ) buttons
To control CD/radio/USB, the same as
–/+ on the unit.
Setup, sound setting, etc., can be operated by
.
DSPL (Display)/PTY (Program Type)
button
To change display items/select PTY in RDS.
VOL (volume) +/– button
To adjust volume.
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
SOUND button
To enter sound setting.
LIST button
To list up (Radio); enter the Quick-BrowZer
mode(CD/USB).
(+)/ (–) buttons
To control CD/USB, the same as /
(ALBUM –/+) on the unit.
Setup, sound setting, etc., can be operated by
.
SCRL (scroll) button
To scroll the display item.
* In the case of a CD/MD changer being connected;
when is pressed, the connected device
("MD") will appear in the display, depending on
which device is connected. Furthermore, if
is pressed, you can switch the changer.
Notes
• When ejecting/inserting a disc, keep any USB
devices disconnected to avoid damage to the disc.
• If the unit is turned off and the display disappears, it
cannot be operated with the card remote
9
commander unless on the unit is
pressed, or a disc is inserted to activate the unit first.
RESET button page 5
(eject) button page 7
To eject the disc.
Disc slot page 7
To insert the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 5).
MENU button
To enter menu.
ENTER button
To apply a setting.
( )/ ( ) buttons
To control CD/radio/USB, the same as
–/+ on the unit.
Setup, sound setting, etc., can be operated by
.
VOL (volume) +/– button
To adjust volume.
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
SOUND button
To enter sound setting.
LIST button
To list up (Radio); enter the Quick-BrowZer
mode (CD/USB).
(+)/ (–) buttons
To control CD/USB, the same as /
(ALBUM –/+) on the unit.
Setup, sound setting, etc., can be operated by
.
* In the case of a CD/MD changer being connected;
is pressed, the connected device
("MD") will appear in the display, depending on
which device is connected. Furthermore, if
is pressed, you can switch the changer.
Notes
• When ejecting/inserting a disc, keep any USB
devices disconnected to avoid damage to the disc.
• If the unit is turned off and the display disappears, it
cannot be operated with the card remote
commander unless on the unit is
pressed, or a disc is inserted to activate the unit first.
9
5