Panasonic DP-1510P Technical Manual page 2

This Product Uses Lead (Pb) Free Solder Printed Circuit
Boards (PCBs).
Regarding Lead-Free (PbF) solder;
Distinction of PbF PCB:
PCBs (manufactured) using lead free solder will have a
the PCB part numbers in a label on the PCB.
Caution:
Pb free solder has a higher melting point than standard solder; typically
the melting point is 50 - 70 F (30 - 40 C) higher. Please use a soldering iron
with temperature control and adjust it to 700 20 F (370 10 C). In case of using
high temperature soldering iron, please be careful not to heat too long.
Pb free solder will tend to splash when heated too high (about 1100 F/600 C).
ECO SOLDER M705 (available from Senju Metal Industry Co., Ltd.;
URL: http://www.senju-m.co.jp) is recommended when repairing PbF PCBs.
The contents of this Technical Guide are subject to change without notice.
Published in Japan.
mark following