Filling The System For The First Time - Fluid Gaming A120 User Manual

1 9
STEP 1
STEP 2

FILLING THE SYSTEM FOR THE FIRST TIME

STEP 1: Preparing the cooling liquid.
The coolant comes in concentrated form. In order to prepare the cooling liquid
you must take a 100mL clear coolant concentrate, which is enclosed with the
kit, and mix it with 900mL of distilled water.
Make sure you mix the mixture properly before pouring it into the water
cooling loop.
H 0
2
STEP 2
Remove the top cover of your reservoir by unscrewing it in counter-clock-
wise direction.
Take the pre-mixed coolant and pour it into the reservoir until the coolant
level is about 2 centimeters below the top.
STEP 3
STEP 3
Turn the power supply on briefl y and check that only the pump is running.
Store the remaining liquid into a PET bottle. Do not use any food
or beverage container!
It is recommended to protect the exposed hardware with a few
paper towels in order you have a leak or mistakenly spill the cool-
ant when pouring it.
Please check again if you have plugged in the EK-ATX Bridging
plug and EK-Cable Pump Testing Adapter correctly. Refer to page
24, chapter RECOMMENDED FILLING AND LEAK-TESTING
PROCEDURE.
/ 25 /