ProForm PFEVEL12716.0 User Manual page 12

11. Orient the Right Pedal Arm (58) as shown.
Apply grease to the axle on the Right Pedal
Arm (58).
Attach the Right Pedal Arm (58) to the Right
Roller Arm (59) with an M8 x 14mm Shoulder
Screw (126), a Small Axle Cover (55), and an
M8 Washer (97).
Repeat this step for the Left Pedal Arm (44).
12. Apply grease to one of the Pedal Arm Axles (64).
Next, slide an M8 Washer (97) and an Axle
Spacer (77) onto an M8 x 13mm Screw (82), and
tighten the Screw a few turns into the Pedal Arm
Axle (64).
While a second person holds the front end of the
Right Pedal Arm (58) inside the bracket on the
Right Upper Body Leg (60), insert the Pedal Arm
Axle (64) into both parts.
Then, slide an M8 Washer (97) and an Axle
Spacer (77) onto another M8 x 13mm Screw
(82), and tighten the Screw a few turns into
the Pedal Arm Axle (64). Then, tighten both
Screws at the same time.
Repeat this step on the other side of the
elliptical.
11
44
55
97
126
12
46
82
12
59
Grease
58
60
Grease
64
97
77
77
58
97
82