Temperature Control And Adjustment - Beko FSP1651W Manual

TEMPERATURE CONTROL AND ADJUSTMENT

3
MAX
á
2
FAST
1
FREEZE
1 2 3 4
The freezer temperature is influenced by the freezer temperature set button ( recomanded
are 2 or 3 position).
Generally, this temperature is bellow -18°C lowertemperatures can be obtained by adjusting
the thermostat knob towards position MAX.
We recommend checking the temperature with a thermometer to ensure that the storage
compartments are kept to the desired temperature. Remember to take the reading
immediately since the thermometer temperature will rise very rapidly after you remove it
from the freezer.
Please remember that each time the door is opened cold air escapes and the internal
temperature rises. Therefore never leave the door open and ensure it is closed immediately
after food is put in or removed.
Freezer control panel
The control panel adjusts the temperature in the freezer and has the following functions:
1 - Orange led - Fast freeze on
When you turn the freezer temperature set buton (4) to the „FAST FREEZE" position, the
orange led (1) will lit and the appliance will run in lowest temperature conditions. The
orange LED stops to lit after 50 hours of running in lowest temperature conditions.
2 - Green led - electricity on (Voltage)
Lights when the appliance is connected to the network and remains lit as long as it is
available power supply. LED green does not provide information on temperature
inside the freezer.
3 - Red Led - High Temperature Alarm
4 - Setting temperature buton
High temperature alarm
After the appliance is turned on for the first time the alarm is not active for 12 hours (red led
is off).
After this period, red led can lights (red led is on) in the following cases:
- If the appliance is overloaded with fresh food
- If the door is left open by mistake.
In these cases the red led will remain lit until the appliance reached the preset temperature.
If the red led is on wait for 24 hours before to announce the authorized service.
Important:
The temperatures obtained inside can vary according to the conditions of use of the
appliance: location, ambient temperature, frequency of door opening, degree of loading
with food. The temperature setting will be modified according to these conditions.
If the red led is on wait for 24 hours before to announce the authorized service.
It could be the warm food placed inside the freezer and/or the door who was left open.
In 24 hrs of functioning the allarm for hight temperature (red led) it should be off.
9