c
Double-click the unconfigured device.
®
Windows
Note
• If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the
device will appear as Unconfigured in the BRAdmin Light utility screen.
• You can find the node name and Ethernet address by printing out the Printer Settings Page. See Printing
the Printer Settings Page on page 31.
d
Choose Static from Boot Method. Enter the IP address, Subnet Mask and Gateway (if needed) of
your print server.
®
Windows
e
Click OK.
f
With the correctly programmed IP address, you will see the Brother print server in the device list.
®
Macintosh
®
Macintosh
Configuring your network printer
2
11