Products; Communications; Languages - Escort iMiniPlus User Manual

Customizing the software 53

Products

Because ConsolePro supports other logger models, you can select
the appropriate type. Make sure the box called iMiniPlus is ticked,
otherwise the software will not be able to find the logger
By using the arrow buttons down the right of the box, the priority of
the model can be set. This may be important when more than one
logger type is used and may speed up the communication of the
model selected.

Communications

You need to select the correct communication port that is connected
to the iMiniPlus. The box above displays all the ports available to be
used within Console. Please make sure that if a USB adaptor is used
it is connected BEFORE you start Console, otherwise it will not show
in the list. If more than one port is displayed and you are unsure which
is the one connected to the iMiniPlus, tick one and then select the
Download or Program and Configure Wizard. If the iMiniPlus doesn't
communicate with the software then select another port until you are
successful.
If a USB adaptor has been used but removed, ConsolePro Software
will default to COM1. If this cannot be used, you must close the
software, reconnect the USB adaptor (COM5 shown above) and
restart ConsolePro again.
If no Com Port is
Note:
available, you cannot
communicate with a logger, but
you can view data files.

Languages

ConsolePro has multi language support. If a change is made it
will not take effect unless ConsolePro has been restarted.