Program Upload Failure; Results From Iminiplus; Getting Results From Iminiplus - Escort iMiniPlus User Manual

32
the Finish button and when ready start the iMiniPlus and place in the environment to be recorded. See
Starting and using the iMiniPlus.
section

Program upload Failure

If the upload has failed either select the Cancel button to close the software and start again or select the
Restart button to start the sequence again. If the iMiniPlus still fails to upload, contact your local distributor
or Cryopak Verification Technologies
Program conditions have not been successfully uploaded into the iMiniPlus.
MP D range MP Dry Ice

6. Results from iMiniPlus

The iMiniPlus stores the logged readings in its internal memory so you must use the ConsolePro software
to extract these readings through the USB or serial adaptor and into a format that can be displayed on the
PC screen. It is usually very important that the information retrieved from an iMiniPlus is retained. Through
the software you can save the information retrieved from an iMiniPlus to your disk drive so that you can
view the information at a later date. This chapter explains how you can retrieve the logged data stored
within an iMiniPlus and have the software display it to you on the screen in a meaningful way.

Getting results from iMiniPlus

Make sure the USB or serial cable is connected to your PC and to the iMiniPlus.
There are two ways to retrieve the data from an iMiniPlus, both of which will achieve the same result.
Click the Download Information icon on the toolbar
Click the "Download Information..." item located under the
Action menu.
The process of retrieving data stored within an iMiniPlus
does not erase it from the memory. If the iMiniPlus is
currently recording while you retrieve the information, it will
continue to record without interruption.
The Download Information feature initiates the Download
Wizard.