Stopping The Iminiplus; Retrieve Information From The Iminiplus - Escort iMiniPlus User Manual

20
By pressing the Start button a third time, the display will return to the Latest reading.
The display will always return to the Latest reading after a 1 minute if the Start button is not pressed.
You can also have the iMiniPlus record a "bookmark" at any time while it is recording, simply by pressing and holding the
Start button for 2 seconds. The word "MARKED" will be displayed at the bottom of the screen.
If the iMiniPlus has stopped recording then the bookmark feature cannot be used.
iMiniPlus Profile
See the section at the beginning of this guide for a full description of the display and button functions.

Stopping the iMiniPlus

The iMiniPlus can be stopped only if this has been enabled in the program conditions. (See Opening the Software section).
To stop the iMiniPlus press the Stop button and hold for 2 seconds, the word "STOPPED" will be displayed in the top right
corner.
If the Start button is pressed the Latest reading will be displayed and subsequent pressing of the Start button will result in the
Highest, Lowest, Average and Alarm conditions being displayed as before.
However, after 1 minute of continuous display of either feature, the display will always return to show the word "STOPPED".

Retrieve information from the iMiniPlus

When you are ready to view the recordings that are stored in the
iMiniPlus, connect it to the USB or serial cable and connect the cable to
your PC as before. If the iMiniPlus is still logging when you go to
download the readings it will continue to record without interruption so
you will be able to download again later if you choose.
Open the ConsolePro Software as previously described and click on the Download icon.
In the "Download Readings" Select the Next button or Search tab.
MP D range MP Dry Ice
Select the Download button or tab.