Iminiplus Display; Enable Display; Display Units Of Measurement; Display Change Rate - Escort iMiniPlus User Manual

28
4 19
5 21
6 22
7 24
8 22
9 21
10 19

iMiniPlus Display

The iMiniPlus LCD can be configured to display or not display the temperature information.
MP D range

Enable Display

Tick this box if you want to enable the display to show the temperature readings and statistics.
If the box is un-ticked, all other features will be greyed out. The iMiniPlus LCD will show "d-off" instead of
a temperature value. Additionally you will not be able to scroll through the highest lowest, average and out
of spec readings. The word "LATEST" will flash and if any alarm had been triggered, "HIGH ALARM" or
"LOW ALARM" will be displayed.
The bookmarking function can still be used when the display is disabled.
When the iMiniPlus is stopped using the Stop button or it stops because it has reached the end of a
logging trip, the words "d-off" will disappear and the word "STOPPED" will appear.

Display Units of measurement

You can select the LCD to display the temperature in Celsius or Fahrenheit.

Display change rate

You can select a frequency or 1, 2, 3 or 4 seconds that the LCD scrolls between the Highest, Lowest,
Average and out-of-spec information. Note that the "LATEST" reading will only change at a frequency
OFF / 0 OFF / 2
OFF / 1 OFF / 3
OFF / 2 OFF / 4
OFF / 3 OFF /5
OFF / 4 ALARM ON /6
ALARM ON /5 ALARM ON /7
ALARM ON/0 ALARM ON /7
OFF/4 ALARM ON
OFF/5 ALARM ON
OFF/7 ALARM ON
ALARM ON /11 ALARM ON
ALARM ON /13 ALARM ON
ALARM ON /14 ALARM ON
ALARM ON /14 ALARM ON
MP Dry Ice