Step 3: Setting The Tv; Changing The Ntsc/Pal Setting Via The Remote Control; Selecting The Colour System That Corresponds To Your Tv - Philips MX5700D User Manual

Step 3: Setting the TV

IMPORTANT!
Make sure you have completed all the
necessary connections. (See page 12
"Connecting TV").
1
Adjust SOURCE control until "DISC X"
appears on the display panel (or press
DISC/MEDIA on the remote).
2
Turn on the TV and set to the correct video-in
channel. You should see the blue Philips DVD
background screen on the TV.
➜
Usually this channel is between the lowest
and highest channels and may be called
FRONT, A/V IN, or VIDEO. See your TV manual
for more details.
➜
Or, you may go to channel 1 on your TV,
then press the Channel down button
repeatedly until you see the Video In channel.
➜
Or, the TV remote control may have a
button or switch that chooses different video
modes.
Changing the NTSC/PAL setting via
the remote control
TV/AV
1 2
,
1
Press DISC/MEDIA on the remote to enter
disc mode.
➜
Make sure no MP3 or picture (Kodak, JPEG)
disc is in disc tray 1.
➜
Wait until the system finishes reading the
discs before proceeding to next step.
If playback begins, press Ç to stop playback.
2
Press and hold DISC/MEDIA on the remote
until "PAL" or "NTSC" appears on the display
panel.
➜
To change the setting, repeat step
DISC/
MEDIA TUNER AUX/DI
1 2 3
4 5 6
2
.
Getting Started
Selecting the colour system that
corresponds to your TV
This DVD system is compatible with both NTSC
and PAL. In order for a DVD to play on this
DVD system, the colour system of the DVD, the
TV and the DVD system should match.
2
,
SETUP MENU
TV Shape
TV System
Video Output
Screen Saver
Set TV system
1
In disc mode, stop playback and press
SYSTEM MENU.
2
Select icon and press 4.
3
Use the joystick (1 2 3 4) on the remote to
navigate in the menu.
Move to and press 2.
Move to 'TV System' and press 2.
Auto – Select this if the connected TV is
compatible with both NTSC and PAL (multi-
system). The output format will be in
accordance with the video signal of the disc.
NTSC – Select this if the connected TV is
NTSC system. It will change the video signal of
a PAL disc (VCD only) and output to NTSC
format.
PAL – Select this if the connected TV is PAL
system. It will change the video signal of an
NTSC disc and output to PAL format.
4
Select an item and press OK.
To remove the menu
Press SYSTEM MENU.
SYSTEM MENU DISC MENU
1
3
SEATING ZOOM
PREV NEXT
4
OK
STOP PLAY/PAUSE
Auto
NTSC
PAL
19