Connections
Step 6: Connecting TV
L
R
C
SL
SR
IMPORTANT!
– You only need to make one video
connection from the following
options, depending on the
capabilities of your TV system.
– Connect the DVD system directly
to the TV.
– Scart Video connection provides
higher picture quality and S-Video
connection provides better picture
quality. These options must be
available on your TV.
– If both Scart Video and S-Video
connections are used to connect to
your TV, the video signal will
automatically switch to S-Video
when you power up the DVD
system. To set the VIDEO
OUT(put) to 'Scart', see page 30.
12
S-VIDEO
IN
AUDIO
OUT
SCART IN
VIDEO IN
OR
MW
FM ANTENNA
VIDEO
AUDIO
OUT
DIGITAL
AUX
TV
LINE
CVBS
OUT
IN
IN
OUT
L
Pb
R
DIGITAL
S-VIDEO
IN
G
G
G
S-VIDEO
IN
AUDIO
OUT
SCART IN
VIDEO IN
OR
SCART OUT
P-SCAN
ON
OFF
Using Scart jack
Use the scart video cable (black) to connect
the DVD system's SCART jack to the
corresponding Scart input jacks on the TV.
OR
Using Composite Video jack (CVBS)
Use the composite video cable (yellow - not
supplied) to connect the DVD system's CVBS
jack to the video input jack (or labelled as
A/V In, Video In, Composite or Baseband) on
the TV.
OR
Using S-Video jack
Use the S-video cable (not supplied) to
connect the DVD system's S-VIDEO OUT
jack to the S-Video input jack (or labelled as
Y/C or S-VHS) on the TV.
~ AC MAINS