Download Print this page

RED EDERA Use And Installation Manual page 43

Multiair model

Advertisement

5-MAINTENANCE AND CLEANING
END-OF-SEASON SHUTDOWN
At the end of each season, before switching the product o , it is recommended to remove all the pellets from the hopper with a vacuum
cleaner that has a long pipe.
The appliance must be disconnected from the mains when it is not used. It is recommended to remove the power cable for
additional safety, especially in the presence of children.
The service fuse may have to be replaced if the control panel display does not go on when the product is next switched on by pressing the
main switch on its side.
There is a fuse compartment on the side of the product, under the power socket. After having disconnected the plug from the socket, use
a screwdriver to open the cover of the fuse compartment and if necessary, replace them (3.15 A delayed).
CHECKING THE INTERNAL COMPONENTS
ATTENTION!
The internal electromechanical components must only be checked by quali ed personnel whose technical expertise
includes combustion and electricity.
It is recommended to perform this routine maintenance annually (with a scheduled service contract), which focuses on a visual and
functional veri cation of the internal components. The following is a summary of the necessary checks and/or maintenance for the
product to work correctly.
PARTS/INTERVAL
Brazier
Ash collection compartment
Glass
Lower exchanger
Complete exchanger
Smoke ducts and ttings for the
chimney
Door gasket
Flue
Technical Dept. - All rights reserved - Reproduction is prohibited
1 DAY
2 3 DAYS
30 DAYS
90 DAYS
1 YEAR
41

Hide quick links:

Advertisement

loading
Need help?

Need help?

Do you have a question about the EDERA and is the answer not in the manual?

Subscribe to Our Youtube Channel