The programmable functions are used
to alter the machine's electronics to
suit changing requirements. Program-
mable functions can be altered at any
time.
The programming is carried out in eight
steps (, , ... ) using the sensor
controls.
Accessing the programming
level
Pre-requisites:
– The washing machine is switched on
(the programme selector is pointing
to a wash programme).
– The washing machine door is open.
Touch the Start/Stop sensor and
leave your finger on it whilst carrying
out steps -.
Close the washing machine door.
Wait until the Start/Stop sensor lights
up constantly ...
... and then take your finger off the
Start/Stop sensor.
After approx. four seconds, will light
up in the time display.
Programmable functions
Choosing and selecting the
programmable function
The number of the programmable
function will appear in the display as
and a number: e.g. .
Touch the or sensor to scroll to
the next or previous programmable
function:
Programmable functions
Keypad tone
Lock code
Control panel switch-off status
Washing machine switch-off
status
Memory
Longer pre-wash Cottons
Soak duration
Gentle action
Reduce temp.
Water plus
Water plus level
Maximum rinse level
Suds cooling
Anti-crease
Backlight brightness dimmed
Confirm the selected programmable
function by pressing the Start/Stop
sensor.
69