Sound And Volume Controls Sound Control; Selecting Surround Sound; Selecting Digital Sound Effects; Volume Control - Philips LX3600D/25 User Manual

Sound and Volume Controls
Sound Control
IMPORTANT!
For proper surround sound, make
sure the speakers and subwoofer are
connected (see page 9).

Selecting surround sound

Press SURR to select :
MULTI-channel or STEREO.
The availability of the various surround
sound modes depends on the number of
speakers used and the sound available on
the disc.
The centre and surround speakers
operate only when the DVD home
cinema system is set to Multi-channel
mode.
In DVD,
The available output modes for Multi-
channel include: Dolby Digital, DTS
(Digital Theatre Systems) Surround, Dolby
Surround and Dolby Pro Logic II.
In music discs, AUX, TUNER, TV,
Select Multi-channel (Dolby Pro Logic
II) or Stereo.
Stereo broadcasts or recordings will
produce some surround channel effects
when played in a surround mode.
However, mono (single channel sound)
sources will not produce any sound from
the surround speakers.
Helpful Hint:
– You are not able to select the surround
sound mode if the system menu/menu bar is
turned on.
36
001-041-LX36-22-Eng

Selecting digital sound effects

Select a preset digital sound effects that
matches your disc's content or that
optimises the sound of the musical style
you are playing.
Press SOUND on the remote.
When playing movie discs or in TV mode,
you can select :
CONCERT, DRAMA, ACTION or SCI-FI.
When playing music discs or while in
TUNER or AUX mode, you can select :
ROCK, DIGITAL, CLASSIC or JAZZ.

Volume control

Adjust VOLUME control (or press
VOL +/- on the remote) to increase or
decrease the volume level.
"VOL MIN" is the minimum volume
level and "VOL MAX" is the maximum
volume level.
To turn off the volume temporarily
Press MUTE on the remote.
Playback will continue without sound
and "MUTE" appears.
To restore the volume, press MUTE
again or increase the volume level.
36
3139 115 22612
21/08/2003, 9:44 AM