Sound And Volume Controls Sound Control; Selecting Surround Sound; Turning On/Off Clear Voice Effect; Selecting Digital Sound Effects - Philips LX7100SA User Manual

Sound and Volume Controls
Sound Control
IMPORTANT!
For proper surround sound, make
sure the speakers and subwoofer are
connected (see page 10).

Selecting surround sound

Press SURROUND to select :
MULTI-CHANNEL, 3D SOUND or
STEREO.
The availability of the various surround
sound modes depends on the number of
speakers used and the sound available on
the disc.
The centre and surround speakers
operate only when the DVD home
cinema system is set to Multi-channel
mode.
The available output modes for Multi-
channel include: Dolby Digital, DTS
(Digital Theatre Systems) Surround, Dolby
Pro Logic and Matrix.
Stereo broadcasts or recordings will
produce some surround channel effects
when played in a surround mode.
However, mono (single channel sound)
sources will not produce any sound from
the surround speakers.
When playing SACD, press
SURROUND to select SACD multi
channel or SACD stereo.

Turning on/off clear voice effect

You can enhance the centre and surround
sound outputs by activating the clear
voice sound feature if you have selected
Multi-channel as the surround mode.
Press VOICE on the remote to select
"CLEAR VOICE ON".
To turn off the setting, press VOICE
again to select "CLEAR VOICE OFF".
40
001-045-LX71-22-Eng

Selecting digital sound effects

Select a preset digital sound effects that
matches your disc's content or that
optimises the sound of the musical style
you are playing.
Press SOUND on the remote.
When playing movie discs, you can select :
CONCERT, DRAMA, ACTION or SCI-FI.
When playing music discs or while in
TUNER or AUX/DI mode, you can select :
ROCK, DIGITAL, CLASSIC or JAZZ.
Helpful Hint:
– For flat sound output, select CONCERT or
CLASSIC.

Volume control

Adjust VOLUME control (or press
VOL +/-on the remote) to increase
or decrease the volume level.
"MIN VOL" is the minimum volume
level and "MAX VOL" is the maximum
volume level.
To listen through the headphones
Connect the headphones by plugging into
the n socket at the front of the DVD
system.
The speakers will be muted.
To turn off the volume temporarily
Press MUTE on the remote.
Playback will continue without sound
and "MUTE" appears.
To restore the volume, press MUTE
again or increase the volume level.
40
3139 115 22741
8/07/2003, 11:27 AM