Connections; Step 1: Set Up The Speakers; Step 2: Connecting Speakers And Subwoofer - Philips LX3600D/25 User Manual

Step 1: Set up the speakers

You can choose to mount the speakers
on the wall. Attach the supplied bracket
firmly to the rear of speakers using the
supplied screws. Then mount a screw
(not supplied) on the wall where the
speaker is to be hung and hook the
speaker securely onto the mounted
screw.
CAUTION!
You should get a qualified person to
attach the brackets to the wall. DO
NOT do it by yourself to avoid
unexpected damage to the
equipment or injury to personnel.
Helpful Hints:
– The surround speakers are labelled as
REAR L (left) or REAR R (right).
– The front speakers are labelled as FRONT
L (left) or FRONT R (right).
001-041-LX36-22-Eng
Step 2: Connecting speakers
Rear Right
Connect the supplied speaker systems
using the fixed speaker cables by
matching the colours of the jacks and
speaker cables.
Helpful Hints:
– Ensure that the speaker cables are
correctly connected. Improper connections
may damage the system due to short-circuit.
– Do not connect speakers with an
impedance lower than the speakers supplied.
Please refer to the SPECIFICATIONS section
of this manual.
9

Connections

and subwoofer
Front
Right
Centre
~AC
FRONT CENTER FRONT REAR REAR SUB-
MAINS
RIGHT LEFT RIGHT LEFT W
SPEAKERS (4 )
Rear Left Subwoofer
3139 115 22612
21/08/2003, 9:43 AM
Front
Left
AUDIO
L L
R R
AUX IN LINE OUT
9