Follow Up Sessions; General Guidelines; Specifications - Rapid Release PRO2 User Manual

FOLLOW UP SESSIONS

During follow up sessions, treatment area should be expanded to cover
all structures linked to your target area. For example: working around the
shoulder apply the Rapid Release Pro2 down the entire arm to the fingers
and back to the upper chest and all around the shoulder blade area. After
the first few sessions you can change position to stretch the area or target
the area from a different angle. You can also change the body position or
apply while weight bearing.
Remember the Rapid Release Pro2's effectiveness derives from its unique
frequency therefore too much pressure can compress the tissue and limit
the penetration of the vibration.

GENERAL GUIDELINES

• There is no observed benefit to sessions lasting longer than
5 minutes per area.
• Use common sense when using the Rapid Release Pro2.
• When in doubt, always err on the side of caution.
See our website www.RapidReleaseTech.com for updated instructions.

SPECIFICATIONS

Leakage current: none
Length: 10.5 in.
Cord Length: 9 ft.
Weight: 2.2 lbs. without cord
Weight: 2.7 lbs. with cord
Frequency: 155Hz +- 10%
5
10-008 Rev 5 02/28/17