Summary of Contents for Rapid Release PRO2
- Page 1 RAPID RELEASE PRO2 USER’S MANUAL Rapid Release is a Trademark of Rapid Release Technology LLC, all rights reserved. www.RapidReleaseTech.com | (949) 415-4778...
- Page 2 10-008 Rev 5 02/28/17...
-
Page 3: Table Of Contents
INTRODUCTION ..................1 INTENDED USE ..................1 IMPORTANT SAFETY INSTRUCTIONS ............. 1 DANGERS AND PRECAUTIONS ............... 1 RAPID RELEASE PRO2 PRECAUTIONS ............ 2 RAPID RELEASE PRO2 COMPONENTS ........... 2 CONTRAINDICATIONS OR WHEN NOT TO USE ........3 VOLTAGE ....................3 MAINTENANCE AND CARE OF YOUR RAPID RELEASE PRO2 MASSAGER ............ - Page 4 10-008 Rev 5 02/28/17...
-
Page 5: Introduction
Do not use while bathing or in a shower. Keep away from water and other liquids. • Do not place Rapid Release Pro2 where it can fall into a bath tub or sink. • Do not touch if appliance has fallen into water! Unplug immediately. -
Page 6: Rapid Release Pro2 Precautions
Keep the initial session brief, so you can see how the body responds to high speed vibration. • Do not carry or pull Rapid Release Pro2 by the cord sharply. Don’t insert any object into the Rapid Release Pro2 openings. •... -
Page 7: Contraindications Or When Not To Use
Use the proper Voltage. Do not plug a 120V Rapid Release Pro2 into a 240V plug and vice versa. If you do need to use your Rapid Release Pro2 with a different voltage, you must use a transformer to change the voltage. -
Page 8: Maintenance And Care Of Your Rapid Release Pro2 Massager
BASIC USAGE INSTRUCTIONS Session time is typically 2 to 5 minutes. 1. Turn on by pushing gray switch on the rear of the Rapid Release Pro2 to the Right. 2. Use a grip that is comfortable to you, making sure that you are not obstructing the air vents. -
Page 9: Follow Up Sessions
During follow up sessions, treatment area should be expanded to cover all structures linked to your target area. For example: working around the shoulder apply the Rapid Release Pro2 down the entire arm to the fingers and back to the upper chest and all around the shoulder blade area. After the first few sessions you can change position to stretch the area or target the area from a different angle. -
Page 10: Rapid Release Technology ® Limited Warranty
Pay shipping or transportation charges from you to us. What you must do to obtain Limited Warranty service. Return product in new condition with proof of purchase directly to Rapid Release Pro2. Contact us at: (949) 415-4778 or visit www.RapidReleaseTech.com/RMA for specific return and shipping instructions. - Page 11 10-008 Rev 5 02/28/17...
- Page 12 Manufactured for Rapid Release Technology, LLC 3621 W. MacArthur Blvd. #111 Santa Ana, CA 92704 ©2013 Rapid Release Technology, LLC. All Rights Reserved. www.RapidReleaseTech.com...
- Page 13 • Unplug Rapid Release Pro1 from outlet when not in use and before cleaning. Never leave unattended when plugged in. • Never operate Rapid Release Pro1 if the cord or plug is damaged, if it is not working properly, has been dropped, damaged, or immersed in water. Contact the factory for inspection and repair.
- Page 14 3. Rotate the Rapid Release Pro1 so the desired treatment head is in contact with the body. 4. When using for the first time on somebody, ask them to hold out their hand with palm up and apply Rapid Release Pro1 to confirm it is acceptable to them.
- Page 15 Pay shipping or transportation charges from you to us. What you must do to obtain Limited Warranty service. Return product in new condition with proof of purchase directly to Rapid Release Pro1. Contact us at: (949) 415-4778 or visit www.RapidReleaseTech.com/RMA for specific return and shipping instructions.