Marantz NR1508 Owner's Manual page 130

Contents Connections
o Speaker Select
Select whether to adjust tones for individual speakers or for all
speakers.
All:
Left/Right
(Default) :
Each:
o Adjust EQ
Adjust tonal balance for each frequency band.
1. Select the speaker.
2. Select the adjustment frequency band.
63 Hz / 125 Hz / 250 Hz / 500 Hz / 1 kHz / 2 kHz / 4 kHz / 8 kHz /
16 kHz
3. Adjust the level.
–20.0 dB – +6.0 dB (Default : 0.0 dB)
Front panel Display
Playback
Adjust all speaker tones together.
Adjust the left and right speaker tones
together.
Adjust the tone for each speaker.
Rear panel
Settings
o Curve Copy
Copy the Flat correction curve created in the Audyssey
0 "Curve Copy" is displayed after Audyssey
0 "Curve Copy" cannot be used when using headphones.
o Set Defaults
The "Manual EQ" settings are returned to the default settings.
130
Remote
Tips Appendix
® Setup.
® Setup has been performed.
Index