Simple ISFM2351 Installation & Operation Manual page 7

Issue: Control button is connected correctly (section 3),
but does not function
Resolution: Once confirmed that the Pink wires are securely connected, and the black
wires are securely connected, and the harness has been connected to accy
power and ground in the vehicle, then continue with these steps to learn the
control button value.
If you can pair with the ISFM2351, download the free app, and follow these steps:
ISFM2351 Control button learning using the smartphone application
1) Open the TranzIt BLU HF application on an iPhone or Android phone paired with
the ISFM2351
2) Touch "Settings"
3) Touch "Enter Learning Mode"
4) Touch "ok" to the pop-up message
a. A series of beeps will play through the FM station 98.1 or aux source
5) Press and hold the control button for 4 seconds or until 2 beeps are heard
through 98.1FM (or aux source).
6) Cycle the vehicle ignition off
a. This completes the button learning process. The control button should now
be operational
If you are unable to pair with the ISFM2351, follow these steps:
ISFM2351 Control button learning without the smartphone application
1) Disconnect ISFM2351 module from wiring harness
2) Set dipswitches to "Learning Mode" (1, 3 ON (down))
3) Connect ISFM2351 module to wiring harness
a. A series of beeps will play through the FM station 98.1 or aux source
b. The Green LED should be solid on the back of the module, this indicates
learning mode.
4) Press and hold the control button for 4 seconds, or until 2 beeps are heard
through 98.1FM (or aux source).
a. The Green LED will turn off
5) Confirm that control button has been learned, by checking the LEDS on
back of the module.
a. All 3 LED colors (Red, Blue, Green) will be illuminated once the button value
is learned
6) Disconnect module from wiring harness
7) Return all dipswitches to the "Default Mode" (1,2,3,4 ON (down))
8) Connect ISFM2351 module to wiring harness
a. This completes the button learning process. The control button should now
be operational.
1 2 3 4
Learning Mode
1 2 3 4
Default
TranzIt BLU HF