Listen To Radio - Philips HTS7500 User Manual

Listen to radio

1
Press RADIO .
2
Use the remote control to control the
radio.
Button Action
/ Selects a preset radio station.
/ Tunes the radio frequency up or
down.
Press and hold this button to
erase the current radio station
from the preset list.
• The preset number for
other radio stations remain
unchanged.
Reinstall all the radio stations
1
Press RADIO .
2
Press and hold PROGRAM for more than
5 seconds.
»
All previously stored radio stations are
replaced.
Note
•
Check the radio antenna connection if no
stereo signal is detected or less than 5 stations
are detected during radio installation.
Search and store radio stations
individually
1
Press RADIO .
2
Press / .
»
It starts searching until a radio station
is detected.
3
Repeat step 2 until you tune to the radio
station you wish to store.
• To À netune the radio frequency,
press / .
4
Press PROGRAM .
»
The preset station number blinks.
»
If no action is carried out within 20
seconds after the above step, it exits
the preset mode.
5
Press / (or the Numeric buttons ) to
select a preset number to store.
6
Press PROGRAM to conÀ rm.
Change tuning grid
In some countries, the frequency step
between adjacent channels in FM band is 50
kHz or 100 kHz.
Note
•
This feature only applicable for certain region.
•
Change tuning grid erases all preset radio
stations.
1
Press RADIO .
2
Press .
3
Press and hold ( Play ) until 'GRID 9' or
'GRID 10' is displayed.
»
'GRID 9' for 50 kHz and 'GRID 10' for
100 kHz.
EN 31