Getting Started; Step 1: Turning On The Dvd System; Turning Off To Eco Power Standby Mode; Step 2: Finding The Correct Viewing Channel - Philips HTS6510 User Manual

Getting Started

Step 1: Turning on the DVD
system
Press the SOURCE button on the front
panel repeatedly to select :
DISC MP3 DIRECT
TV AUX DI
Or
Press DISC/USB, TUNER, TV,
AUX/DI or MP3 DIRECT on the
remote control.
If the USB is detected, pressing the
DISC/USB will toggle between DISC
and USB mode.
Press TUNER to toggle between FM
and MW band.
Press AUX/DI to toggle between
analogue audio input and digital audio
input.
Press MP3 DIRECT to playback the
audio tracks from your portable audio/
HDD player which is connected to this
DVD system.
Turning off to Eco Power standby
mode
Press STANDBY ON (2).
The display screen will turn off.
20
FM MW
DISC ....
A
B
Step 2: Finding the correct
viewing channel
Before you start ...
Make sure you have completed all the
necessary connections.
Press SOURCE button until "DISC"
appears on the display panel.
Turn on the TV and set it to the correct
video-in channel. You should see the
blue DVD background screen on the TV.
You may go to Channel 1 on your TV,
then press the Channel Down button on
your TV's remote control until you see
the Video In channel.
You may press ° button repeatedly
on your TV's remote control.
Usually this channel is between the
lowest and highest channels and may be
called FRONT, A/V IN, VIDEO. See your
TV manual for more details.