Option 4: Connecting To A Progressive Scan Tv Or Component Video Input; Option 5: Connecting To A Hdmi-Compatible Tv - Philips HTS6510 User Manual

Basic Connections
Option 4
NT
T
L
R
Option 4: Connecting to a
Progressive Scan TV or component
video input
The progressive scan video quality is only
available when using Y Pb Pr connection
and a progressive scan TV is required. It
provides superior picture quality when
watching DVD movies.
A
Follow option 1 to make the basic video
connection.
B
Use the component video cables (red/
blue/green - not supplied) to connect the
Y Pb Pr sockets on the DVD system to
the corresponding component video
input sockets (or labelled as Y Pb/Cb Pr/
Cr or YUV) on the TV.
C
If your TV accepts progressive signals,
proceed to 'Getting Started - Step 5:
Setting up Progressive Scan feature' for
detailed progressive feature setup.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
16
(continued)
FM/MW ANTENNA
~
MAINS
MW
FM 75
A
B
Option 5
SUB- FRONT FRONT
WOOFER RIGHT LEFT
HDMI OUT
Option 5: Connecting to a HDMI-
compatible TV
HDMI (High Defi nition Multimedia
Interface) is a digital interface that allows
pure digital video transmission without
the loss of image quality.
Use an HDMI cable (not supplied) to
connect the HDMI OUT on this DVD
system to the HDMI IN on a HDMI-
compatible device (e.g. HDMI TV, HDCP
compliant DVI TV).
When you have completed the necessary
connections, installation and set-up, see
'Audio Setup Page and Video Setup Page'
for optimum HDMI audio and video
settings.
Helpful Hints:
– The HDMI is backward compatible with
some DVI devices using an appropriate
adaptor plug.
– If a DVI device is connected, an additional
audio cable is required for audio transmission.
– Most of the older DVI enable devices are
not HDCP compliant and playback is not
possible.
L
R