Janome MC9900 Additional Service Manual page 12

@1
@3
@4
@5
@6 @ 7 @ 8 @ 9 # 0
⁄6 The Y-motor @1 is separated from the base @2 .
@2
⁄7 Remove the setscrews @3 (2 pcs.).
@3
⁄8 Remove the cord binder and disconnect the
connector @5 from the printed circuit board S2 @4 .
⁄9 Pry up the lock tab of the connector with a precision
driver and pull out the red @6 , orange @7 , brown @8 ,
brown @9 and red #0 cords.
Remove the Y-motor.
NOTE:
The colors of the cords may differ from actual
products.
•
Attaching Y-motor
Follow the above procedure in reverse.
11
MC 9900