Rapid pre-heating
How to program
Example: you want to use
the power level e as the
lower steady temperature
14
This function can be used when you want to heat
something up to the maximum temperature quickly
and then switch to a steady lower temperature
automatically.
All the hotplates are fitted with this function.
Carry out the following steps:
1.
Select the hotplate and the power level that you
want to use (e.g. e).
2.
Touch both the + and - symbols at the same time.
The light will flash on and off and show
alternatively A and the power level (e.g.4). You
have now activated the function. The hotplate will
now come on at the maximum power level 9.
After the corresponding amount of time has
passed the hotplate will automatically switch to the
level selected (e.g.4). The rapid pre-heating
function has now finished and has switched off.