Table of Contents
Advertisement
How to program
Example: Select power
level f of the number 3
cooking zone
Changing the power level
Disconnect the cooking
zone
The hotplate must be connected.
1.
Touch the symbol a few times until a 0 flickers
on the visual indication of the required cooking
zone (for example 3).
Note: Each cooking zone is accessed sequentially
and in clockwise direction.
2.
In the following 5 seconds, touch the sensor +
or -.
The basic programming appears:
Symbol + = power level 1
Symbol - = power level 9
3.
Modification of power level:
Touch the symbol + or - until the required power
level appears (for example 5).
The power level which lights up on the visual
indication needs to flicker. If this is not the case, the
power level will not be able to be modified.
Touch the symbol until 0 appears.
If a high power level has been selected, the symbol +
can be touched until 9 appears. By briefly touching
the symbol + again, 0 appears.
The cooking zone is disconnected and after 5
seconds the residual heat indicator appears.
11
Advertisement
Table of Contents
