Fenix Imvico EPC1100 Operation Manual page 23

FENIX IMVICO
________________________________________________________________
LF
________________________________________________________________
Decimal codes:
Hexadecimal codes:
Function: Provides the same function as CR. Any LF code received immediately
following a CR is ignored.
________________________________________________________________
CR
________________________________________________________________
Decimal codes:
Hexadecimal codes:
Function: Prints the contents of the line buffer in the currently selected print mode,
and then feeds paper a predefined distance.
Operation: Line spacing is initialised to 16 dots when power is turned on or when a
reset is performed.
The EPC1100 only performs a line feed operation when the line buffer is empty.
The amount of paper feed for one line is the amount of line spacing plus the character
height which is set at that time.
Any LF code received immediately following a CR is ignored.
________________________________________________________________
CAN
________________________________________________________________
Decimal codes:
Hexadecimal codes:
Function: Cancels the contents of the line buffer that have been received before this
code.
Operation: Clears the buffers.
________________________________________________________________
ESC + '@'
________________________________________________________________
Decimal codes:
Hexadecimal codes:
Function: Initializes the EPC1100
Operation: The EPC1100 clears the contents of the line and input buffers.
Be careful that all data which has been input before reset processing disappears after
reset code input.
<10>
<0A>
<13>
<0D>
<24>
<18>
<27><64>
<1B><40>
EPC1100 OPERATION MANUAL
LINE FEED
CARRIAGE RETURN
CANCEL
RESET
23/37