The Following Symptoms Are Not Trouble - Panasonic NA-F80B3 Service Manual

Fully automatic washing machine
Table of Contents

Advertisement

8.2 The following symptoms are not trouble.

Symptoms
Remaining time fluctuates.
No operation.
Cannot change the operation
contents. (after start)
The power is not turned on
immediately after power-off.
No water supply.
Water is supplied in the middle
of Wash process.
The water level is too high for
the amount of laundry.
The water level is too low for
the amount of laundry.
The operation started with Rinse
process, however, water is not
supplied.
The operation suddenly changes
to rinse process in the middle of
spin process. /
Only spin is desired, however,
the operation starts with rinse.
Irregular rotation during spin.
NA-F80B3 / F80H3 / F90B3 / F90H3 / F90G3 /
F1003B / F1003H / F1103G / F100B3 / F100H3 / F100G3
Checkpoints
• Remaining time is corrected during the process and displayed.
(Time indication is an approximation.)
• Power failure?
• Is the lid closed completely?
• Is the power fuse or the breaker cut off?
• Is the power plug plugged in completely?
• Is the water faucet turned on?
• Is the "Start" button pressed?
• Has the "Reserve" program been set?
• The contents can be changed in "Wash" process by pressing
"Pause". To change the course or to change the contents after
"Rinse" process, turn the power off and then turn on again.
• Button operation is ignored approx. 10 seconds after power-off.
• Is the water faucet turned on?
• Is the lid closed?
• Water failure?
• Is the water supply filter clogged with dust?
• When level goes down, water is suppplied automatically.
• When large amount of laundry, water is supplied several times
automatically.
• If the laundry is wet or if there is water in the tub before operation,
the water level may be higher.
• With light clothes (chemical fibre, etc.), the water level may be
lower.
• If there is no water in the tub, water is supplied after spin.
• If there is water in the tub, water is supplied after water discharge.
• If the laundry is unevenly placed in the tub, the machine starts to
rinse and automatically corrects the arrangement.
(Put the laundry as evenly as possible)
• The tub rotation speed is adjusted to reduce bubble foaming
during spin.
- 18 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents