Installation; Checking Of Placement; Installation 4.1 Checking Of Placement - Panasonic NA-F80B3 Service Manual

NA-F80B3 / F80H3 / F90B3 / F90H3 / F90G3 /
F1003B / F1003H / F1103G / F100B3 / F100H3 / F100G3

4. INSTALLATION

4.1 Checking of placement

Hose extension
If extended external part is necessary when connecting the drain hose, the length of the drain hose should be
less than 3 m and the height should be below 10 cm.
Install the machine 10 cm or more away from the wall.
Below 10 cm
3 m max.
- 9 -
Connect the water supply hose
to the water supply valve screw.
Elbow
Nut
1. Push the water supply hose nut straights onto
the water supply valve screw.
2. Hold the elbow by lifting it up, screw the nut
onto the water supply valve screw, and fi rmly
tighten the nut.
3. After the nut is tightened, check whether or
not the elbow is unsteady or loose.
4. After tightening, open the faucet to confi rm
that there is no water leakage.
[Cautions]
Firmly tighten the nut, otherwise water leakage
will result.
Water Pressure Rating :
4 5
2.9 x 10 ~ 9.8 x 10
Do not put hose tip
under the water
Good Example
Water supply
valve screw
Pa
Over 10 cm