Set the speaker delay time
1
Press SURROUND to switch to multi-
channel surround mode.
2
Press AUDIO SETUP .
3
Press
/
to select the speaker for
which you want to set the delay time,
then press OK .
'CENTER DELAY' - for centre speaker.
»
'SURROUND DELAY' - for surround
»
speakers.
'BACK DELAY' - for back (rear)
»
speakers.
4
Press
or adjust the volume control to
increase or decrease the delay time, then
press OK .
•
The last volume setting will be
stored automatically after 5 seconds
of inactivity.
5
Repeat steps 3 - 4 for other speaker
settings.
•
To return to previous step, press
BACK .
•
To exit the setup, press
SETUP .
Note
•
This setting is only applicable to centre, back
and surround speakers.
•
Set a longer delay time if the centre, back or
surround speakers are closer to the listening
position than the front speakers.
•
Rear and centre delays range from 0 to 15 MS.
The default setting is 0 MS.
EN
16
AUDIO
Sync audio output with video play
1
Press SURROUND to switch to multi-
channel surround mode.
2
Press AUDIO SETUP .
3
Press
/
until 'AUDIO SYNC' is
displayed, then press OK .
4
Press VOL +/- within 5 seconds to set the
delay time for audio output.
•
To return to previous step, press
BACK .
•
To exit the setup, press
SETUP .
Tip
•
If the volume control is not adjusted within 10
seconds, it resumes normal volume control
function.
AUDIO