Misting Fan Assembly Instructions; Cleaning/Maintenance Instructions; Fan Blade & Front Grille Cleaning - NewAir AF-600 Owner's Manual

MISTING FAN ASSEMBLY INSTRUCTIONS

1. Turn the fan speed to off position.
2. Attach the end of the Misting Hose Valve to a standard ¾" garden hose and turn on
the water.
3. Turn the Valve Handle to "ON" position to turn on water to the fan. (Fig. 8)
4. Turn the fan on again and enjoy the mist.
5. Turn the Valve Handle to "OFF" position to temporarily shut down the mist, if
needed.

CLEANING/MAINTENANCE INSTRUCTIONS

Follow these instructions to correctly and safely care for your fan.
ATTENTION:
1. Always unplug the fan before cleaning or disassembling.
2. Do not allow water to drop on or enter into fan housing.
3. To ensure adequate air circulation to the motor, keep the vents at the rear
of the motor housing clear of dust, fluff, etc. Unplug the fan before using a
vacuum cleaner to clean the grilles.
disassemble the fan to clean it.
4. Wipe the exterior with a soft cloth moistened with a mild soap solution. Do
not use any of the following as a cleaner: gasoline, thinner, or benzene.
FAN BLADE & FRONT GRILLE CLEANING
If you feel it's necessary to clean the fan blade and interior of the fan grilles, please
follow these steps.
9
misting hose
valve handle
A Name You Can Trust
It should not be necessary to