Siemens RL Instruction Manual page 25

Introd uction and Safety
Introduction
The RL family of low voltage circuit breakers is designed t o
meet all t he applicable ANSI, NEMA AND IEEE standards.
Successful application and operat ion of this equipment
depends as much upon proper installation and maintenance
by the user as it does upon t he c areful design and fabrication
by Siemens.
The purpose of t his Inst ruction Manual is to assist t he user in
developing safe and efficient procedures for the installation,
maintenance and use of t he equipment.
Contact t he nearest Siemens representative if any additional
informat ion is desired.
A DANGER
Power circuit breakers operate
voltages
mec�anical parts which operate at high
speed .
When operated improperly, this equipment
will cause death, person injury and
property damage.
To av o i d e l ect ric a l s h oc k , b u r n s a n d
entanglement i n moving parts t his equipment
must be installed, operated and maintained
only by q ualified persons t horoughly familiar
wit h t he eq uipment, instruction manuals and
drawin s.
QuaUfied Person
For t he purpose of t his manual and product labels, a
Qualified Person is one who is familiar with t he installation,
construction and operation of t his eq uipment and the hazards
involved. In addition, this person has the following qualifica­
tions:
•
Training and authorizat ion to energize, de-energize,
c lear, ground and tag c ircuits and eq uipment in accord­
ance with established safety practices.
•
Training in t he proper c are and use of protective equip­
ment such as rubber gloves, hard hat, safety glasses,
face shields, flash clot hing, etc., in accordance with es­
tablished safety procedures.
•
Training in rendering first aid.
2
at
high
and have spring- loaded
Signal Words
The signal words "Danger•, "Warning• and "Caution• used
in t his manual indicate t he degree of hazard t hat may be
encountered by t he user. These words are defined as:
Danger - Indicates an imminently hazardous situation which,
if not avoided, will result in deat h or serious injury.
Warning Indicates a potentially hazardous situation which,
-
if not avoided, could result in death or serious injury.
Caution Indicates a potentially hazardous situation which,
-
if not avoided, may result in minor or moderate injury.
Dangerous Procedures
In addition to other procedures desc ribed in t his manual as
dangerous, user personnel must adhere to t he following:
1 .
Always work on a de-energized breaker. Always de-ener­
gize a breaker, and remove it from t he switchgear before
performing any test s, maintenance or repair.
2 . Always perform maintenance on t he breaker after the
spring-charged mechanisms are discharged.
3. Always let an interloc k device or safety mechanism per­
form its function without forcing or defeating the device.
Field Service Operation
Siemens can provide competent, well-trained Field Service
Representatives t o provide tec hnical g uidance and advisory
assistance for t he installat ion, overhaul, repair and main­
tenance of Siemens eq uipment , processes and systems.
Contact regional service centers, sales offices or the factory
for details.