Advertisement
Possible cause
Problem
A few water droplets
This is part of the water
come out when the
inlet design.
water tank is detached.
The suction power is
Fluff has collected in the
weakening.
grille and has clogged up
the openings.
The suction power is
You are making fast
not strong.
strokes. Fast strokes
diminish the suction power.
You are using low suction
setting.
When I use the
Dirt and fluff have
steamer, I see loose
collected in the grille.
fluff and dirty particles
on my garment.
There is an excessive
Heavy use of the
amount of water
appliance has caused
droplets on the floor
excessive amount of
during a long steaming
water condensed inside
session.
the appliance, and drips
out of the steamer head.
Suction function still
This is part of the design.
can be turned on
when the steam
function is set to off
position.
Solution
This is normal.
Regularly check and clean the
grille. Refer to
section.
Make slow downward strokes.
Use II (high suction setting) for
stronger suction.
Regularly check and clean the
grille. Refer to
section.
Let the appliance cool down.
Remove the grille and press a dry
cloth against the black surface to
remove the condensed water.
If the problem persists, leave the
appliance to dry for a few days.
Alternatively, after a long steaming
session, turn off the steam and
turn on the suction function for at
least 1 hour.
Always store the appliance in a
place with good ventilation.
Do not cover the steamer head
during storage.
This is normal. After the appliance
is unplugged, the suction function
cannot be turned on.
25
Advertisement
