Installation; Choice Of The Location; Positioning Of The Appliance - OERTLI PK 550 Installation And Service Manual

4 Installation

4.1 Choice of the location

4.1.1

Positioning of the appliance

For the assembly and because of their design, PK 550 boilers require
no special base. Their closed furnace system means that the floor
need not have refractory properties. All you have to ensure is that the
floor can support the weight of the boiler when it is fitted for operation.
If the boiler location is not determined precisely, leave enough space
around the boiler to facilitate monitoring and maintenance
operations.
Boiler body *
Straight connection (not supplied) *
* 1) In order to facilitate subsequent work on the boiler(replacing the
water distributing tube etc.) use a flanged connection from the boiler
to the system, making sure you comply with minimum clearance
dimension D.
Angled connection (not supplied)
Air inlet
PK PK
Boiler
550-9 550-10 550-11
L 1555 1645 1755
M 319 243 297
C min. 300 300 300
D min. - -
18/03/2016 - 300020192-02
PK PK PK PK
550-12 550-13 550-14 550-15
1845 1955 2105
221 275 259
300 300 300
- - - -
Air outlet
If A = 1.2 m (door opening side), A' = 0.5 m
If A = 0.5 m, A' = 1.2 m (door opening side): adapt the dimensions
on the basis of the dimensions of the burner when the door is open.
B = 1.5 m: adapt the dimensions on the basis of the dimensions of
the burner.
PK PK PK PK
550-16 550-17 550-18
2245 2355 2445 2555
324 269 321 265
436 436 656 656
136 136 356 356
PK 550
PK PK PK PK
550-19 550-20 550-21 550-22
2645 2845 2955 3045
299 269 324 269
656 936 936 936
356 636 636 636
4. Installation
PK PK PK
550-23 550-24 550-25
3155 3245 3355
324 249 303
1266 1266 1266
966 966 966
11