Sitecom WLX-5000 Manual page 27

Authentication Mode
Passphrase Key
Mode
WPS via Push Button
WPS via PIN
It shows the active authentication mode for the wireless
connection.
It shows the passphrase key that is randomly generated by
the wireless router during the WPS process. You may need
this information when using a device which doesn't support
WPS.
In Client mode the device is set to connect to your existing
network. In Registrar mode the device is set to connect to
your clients.
Press the button to start the WPS process. The device will
wait for the WPS request from the wireless devices within 2
minutes.
You can fill-in the PIN code of the wireless device and press
the button to start the WPS process. The router will wait for
the WPS request from the wireless device within 2 minutes.