Wifi Settings - Sitecom WLX-5000 Manual

11 WiFi Settings

You can manually configure the WiFi settings of the Range Extender. The 2.4GHz and
5GHz network can both be configured separately. The settings for both frequencies are
similar, so only the 2.4GHz settings are shown here.
Basic
Band
MAIN ESSID
Channel Number
Associated Clients Click 'Show Active Clients' button and a new popup window will
Please select the wireless band you wish to use. By selecting a
different band setting, you'll be able to allow or deny the wireless
clients on a certain band.
Please input the ESSID (the name used to identify this wireless
access point) here. You can input up to 32 alphanumerical
characters. PLEASE NOTE THAT THE ESSID IS CASE SENSITIVE.
Please select a channel number you wish to use. The channel
number must be same as the wireless access point you wish to
connect.
appear which contains the information about all wireless clients
connected to this access point.
You can click the 'Refresh' button in the popup window to keep the
information up-to-date