Samsung WD106UHSA SERIES Service Manual page 31

No. Part name
12 WASH
HEATER
Description
1. Separate the back cover.
2. Separate the connection
housing (4). separate
the cover heater.
3. Remove the nut holding
the heater and separate
the heater.
4. Remove the heater from
the tub.
Caution
Make sure to insert the heater into the
correct position of the bracket inside
the tub when reassembling it. Otherwise,
there is a danger of a fire. Make sure to push it inwards until the
packing part comes into the tub completely when reassembling
it so that the packing part is completely stuck to the Tub. Fasten
the holding nut with a force of 5 kgf/cm2. If the nut is not fas-
tened properly, there is a danger of water leaking.
Figure
Disassembly and Reassembly_29