Samsung WD106UHSA SERIES Service Manual page 28

No. Part name
10 Removing
the Duct
(Replacing
the Dry
Motor)
10 Removing
the Duct
(THERMO-
STAT)
10 Removing
the Duct
(THERMIS-
TOR)
26 _Disassembly and Reassembly
Description
3. Remove the screws.
√Check the following 2 points for troubleshooting
1. Revolve the dry motor manually and check whether spin the dry
motor manually and check that it rotates freely.
2. Measure the internal resistance (between the white and blue wire
terminals)
→ several Ω: short-circuited, ∞: disconnected.
1.Remove the connector.
Remove the jacks connect-
ed to the thermostat and
remove the four (4) screws,
as show in the figure.
√Check Points for Troubleshooting
Measure the resistance between both ends of the thermostat: 0 Ω
●
→ If the studio is raised due to overheating and it is pressed, it will be
returned to the original position with a 'snapping' sound.
1. Remove the 2 screws
connected to the dry duct
and remove the white
thermistor.
Figure