Table of Contents
Advertisement
While the monitor is in Communication status, you can press "Voice Volume Setting Key" (Image
12) to set the monitor's voice volume. The voice volume increases each level after one pressing,
but it will return to the lowest level after one pressing if the volue has been in the highest level.
The alteration cycle is: 1→ 4→1.
4). BRIGHTNESS SETUP
While the monitor is in Communication status, you can press "Brightness Setting Key"
13) to set the monitor's display brightness. The brightness increases each level after one pressing,
but it will return to the lowest level after one pressing if the brightness has been in the highest
level. The alteration cycle is: 1→ 8→1.
5). COLOR SETUP
While the monitor is in Communication status, you can press "Color Setting Key" (Image 14) to
set the monitor's display color. The color increases each level after one pressing, but it will return
to the lowest level after one pressing if the color has been in the highest level. The alteration cycle
is: 1→ 5 →1.
VI．SYSTEM INSTALLATION
1）. MONITOR(S)
There is no need for the installation for monitor(s), please start the monitor(s) according to following steps:
1.
Insert battery(s) to the monitor(s) , Image15;
2.
Put the monitor(s) on to the monitor chager(s);
3.
Connect monitor charger(s) to AC power;
（
Image
15）
4/7
（Image 12）
(Image
Image
（
Image
（
13）
14）
Advertisement
Table of Contents
