Table of Contents
Advertisement
Increase Monitor or Camera Unit:
Step 1： Press Brightness key and
Indicator"flicks , the master is ready to code the new devices to existing system.
Step 2：Press Brightness key and
Working Indicator"flicks , the monitor is ready for coding to the existing system.
With in 16seconds, if the both monitors sound "Di-" "Di-" "Di-", that means coding success, the monitors
will return standby status automaticaly. If the coding fails, the both monitors only sound "Di-", also
return standby status automaticaly
Step 3; Constantly press "CALL" button on camera unit until a "Di-"sound while the master is in coding status. With in
16seconds, if both master and camera unit sound "Di-" "Di-" "Di-", that means coding success, the units will
return standby status automaticaly. If the coding fails, the both units only sound "Di-", also return standby
status automaticaly.
For security consideration, each camera unit only has one chance for coding !
（Image 8）
2). CALL MUSIC SETUP
.While the monitor is in standby status, if press the Music Setting Key for 3 seconds (image 10), you can start to select "Call
Music" by press
confirm the "Call Music" by press "ON/OFF" button (Image 11). There are totally 12 optional musics stored in
monitor.
Image 10）
3). VOICE VOLUME SETUP
button same time while in standby status until "Monitor Working
button on the 2
button, there is a "Call Music"change each time you press
ON/OFF
Button
3/7
nd
monitor same time while in standby status until "Monitor
（Image 9）
（Image 11）
button. You can press
Lock Release
Advertisement
Table of Contents
