Decal Descriptions And Locations - Husqvarna TS 510 G Operator's Manual

DESCRIPCIÓN DE CALCAMONIAS Y UBICACIONES
LIFTING EYE
Read manual.
LIFT
Lea el manual.
HERE
Veuillez lire le manuel.
WARNING
Only Use Lifting
Sling Approved
For Overhead
Lifting.
LIFTING
EYE
Lower Blade
Before Lifting
Secure Or
Remove
Conveyor Cart
Before Lifting
OFF
Location: Left Side of Engine Platform
P/N 177588
Warning Logo, Large
Location: Side of Bladeguard

DECAL DESCRIPTIONS AND LOCATIONS

DEPTH STOP ADJUSTMENT
14"
0
Read manual.
Lea el manual.
Veuillez lire le manuel.
14"
(355,6mm)
14"
WATER PUMP ENGAGEMENT
WATER PUMP ON
1. Loosen Knobs.
WATER PUMP OFF
2. Push Knobs Right
1. Loosen Knobs.
To Contact Belt.
2. Push Knobs Left.
3. Tighten Knobs.
3. Tighten Knobs.
Do NOT Run Pump Dry.
P/N 54190415
Switch Must Be
In "Start" (ON)
Position Before
Starting Engine.
P/N 5419534
Stop Switch Decal
Location:
Near Stop Switch on Cutting Head
Location: Side of Water Pan
20"
20"
(508,0mm)
14"
20"
ON
START
ARRANQUE
STOP ENGINE
PARADA MOTOR
STOP
P/N 54190733 (X)
Location: Front of Belt Guard, Front of Water Pan
P/N 5419075 (X)
7
P/N 169065
Location: Rear of Engine Belt Guard
P/N 04618
Warning Logo
Location: Front of Bladeguard