Advertisement
4 SYSTEM CONNECTION
1.
Connect the supplied AC power adapter into the DC INPUT connector
in the back of the receiver, plug the adapter into a wall socket
2.
Connect the receiver's audio output to the mixer's input by 6.35mm
audio cable
3.
Pushed the receiver's power switch to "ON" position, the power
indicator will glows.
4.
Slide the transmitter's power switch to "ON" position, the indicator
shines for a moment, at that time, the receiver's signal light will glow.
5.
Adjust receiver volume knob, and the volume adjustment of mixer or
amplifier to get a suitable volume.
6.
When the performance is over, turn off the sound system and slide the
transmitter 's POWER/OFF switch to the "OFF" position to conserve
battery power.
5 SPECIFICATIONS
NOTE: For a list of compatible frequencies that are usable in your area,
refer to the supplied frequency supplement.
1.RF Carrier Frequency Range
640MHz to 698MHz (Available frequencies depend on the applicable
regulations in the country where the system is used).
5
2.Effectiver Range
50m(150ft)Under optimal conditions
NOTE:Actual working range depends on RFsignal absorption,
reflection, and interference from objects and environment.
3.Audio Frequency Response
Typioally 50Hz to 15,000Hz, 3dB
NOTE:System response is depend on the using accessory of
microphone
4.Modulation:FM
5.Audio bandwidth:40Hz to 20kHz
6.THD:typ.1%
7.S/N ratio:typ. 103dB(A)
8.Power requirements:9V DC 150mA
9.Transmitter current:80mA
10.Receiver power supply:2X 1.5V AA size battery
11.Transmitter power supply: 1 X 1.5V AAA size battery
12.Dimensions : Receiver: 5.1" X 3.1" X 1.4" inches
Transmitter: 3" X 1" inches
6
Advertisement
