I/O Port Specifications - HP Integrity MC990 X User Manual

Feature
Voltage
Frequency
Total harmonic distortion
The Integrity MC990 X system RMC power and technical specifications are provided in RMC
specifications.
Table 8: RMC specifications
Feature
Height
Width
Depth
Weight
RMC power supply
RMC power cords
RMC power requirements
Voltage
Frequency
Power
Hold-up time
Air flow (front to back)
Acoustical noise
Heat dissipation to air

I/O port specifications

This section contains specifications and port pinout information for the base I/O ports of your system, as
follows:
• Motherboard VGA port information on page 61
• Ethernet port on page 62
60 I/O port specifications
Specification
180-264 VAC (North America)
312-457 VAC (International)
50-60 Hz
Less than 10% at full load
Specification
1.72 inches (44 mm)
17.2 inches (43.7 cm)
29.84 inches (75.8 cm)
20 lb. (9.1 kg)
Two per RMC
Two 8-ft (2.4 m) drop cables
100-120V (90-132 VAC min/max)
200-240V (180-264 VAC min/max)
50-60 Hz (47-63 Hz min/max)
(50W) per supply
20 ms
Maximum = 35 CFM (60 m3) per hour
Approximately 68 dBA
Approximately 171 BTU (0.02 tons) per hour