Husqvarna Z 242F Operator's Manual page 19

OPERATION
4. To re-engage the EZT's to drive, reverse the
above procedure.
Load the machine into truck or trailer by driving
slowly up the ramps. DO NOT LIFT! The machine
is not intended to be lifted by hand.
WARNING! Make no adjustments without:
• the engine stopped,
• the park brake engaged
WARNING! Bypass linkages are located
near to the muffler. To prevent burns, the
engine should be shut off and allowed to cool
before the bypass linkage levers are touched.
WARNING! Use more care when loading
the machine into a truck or trailer using ramps.
There is the possibility of dangerous injury or
death if the machine falls off the ramps.
19