NC-TXF22, NC-TXF30
4.16 Stopper comp.
1. Adjust lock pin of stopper comp. at "Release".
2. Put minus screwdriver into stopper comp., gap and use power to remove it.
Operating point
After assemble, should to feel to touching of supporting plate on lock knob.
Stopper comp.
4.17 Lock lever A (Assemble - Remove knob)
Bottom up thermo pot and press lock lever A deepest then pust it down and pull out.
FIG. 16
- 15 -
Lock lever A
Remove this portion
as shown with arrow
FIG. 17