Changing The Display - Sony CMT-SBT20 Operating Instructions Manual

Note
• The system turns on exactly at the time set in
Play Timer. When the sound source is a CD, MP3/
WMA disc or USB, it may take some time to start
playback.
• The Play Timer does not work if the system is
already on at the preset time.
• When the sound source for a Play Timer is set to a
radio station, the last tuned frequency is used for
a Play Timer. If you change the radio frequency
after setting the timer, the radio station setting
for the timer will also be changed.
To check the setting
1
Press TIMER MENU  .
2
Press  /   to select "SELECT," then press
 .
3
Press  /   to select "PLAY SEL," then
 .
press
The timer setting appears on the display  .
To cancel the timer
1
Press TIMER MENU  .
2
Press  /   to select "SELECT," then press
 .
3
Press  /   to select "OFF," then press
 .
Changing the
display
To Press
DISPLAY  repeatedly
Change
information on the when the system is on.
display*
DISPLAY  when the
Check the clock
when the system is system is off. The clock is
off displayed for 8 seconds.
* For example, you can view CD-DA/MP3/WMA
disc information or USB device information such
as track number, file/folder name, album name,
artist name, and remaining playing time.
Notes on the display information
• Characters that cannot be displayed appear as
"_".
• The following are not displayed;
– total playing time for an MP3/WMA disc and a
USB device.
– remaining playing time for an MP3/WMA file.
– WMA tag information (song title/album
name/artist name)
• The following are not displayed correctly;
– elapsed playing time of an MP3/WMA file
encoded using VBR (variable bit rate).
– folder and file names that do not follow either
the ISO9660 Level 1, Level 2 or Joliet in the
expansion format.
• The following are displayed;
– remaining playing time for a track.
– ID3 tag information for MP3 files when ID3
version 1 and version 2 tags are used (ID3
version 2 tag information display has priority
when both ID3 version 1 and version 2 tags are
used for a single MP3 file).
– up to 64 characters of ID3 tag information
using uppercase letters (A to Z), numbers (0 to
9), and symbols (< > +, [ ] \ _).
27
GB