Lenovo RackSwitch G8272 Quick Start Manual page 17

6. To check if the ONIE image was successfully installed on the switch, use the
following command:
© Copyright Lenovo 2017
G8272# display boot
Current FLASH software:
active image: version 10.1.1.0
standby image: empty
Uboot: version 10.1.1.0
ONIE: version 10.1.1.0
Currently set to boot software active image
Currently scheduled reboot time: none
Current port mode: default mode
In the command output, the current ONIE image installed on the switch is
displayed under the Current FLASH software section.
17
ONIE on the G8272