Voice Only Wt41N0 Boot Up - Motorola WT41NO User Manual

1 - 14 WT41N0 User Guide
Splash Screen
Figure 1-18
Start Up Window
Figure 1-19
Use the
Calibration
Carefully press and briefly hold on the center of the Calibration screen target. Repeat the procedure as
1.
the target moves and stops at different locations on the screen. This enters the new calibration settings.
Calibration Screen
Calibration Screen
Figure 1-20
Once all of the new calibration settings are input, tap the screen or press the ENTER button to save the
2.
new calibration settings. Press ESC to discard the new calibration settings.

Voice Only WT41N0 Boot Up

When the Voice Only WT41N0 is powered on for the first time the three LEDs on the front housing blink as
follows:
Application Controlled LED and Battery Status LED on.
1.
All LEDs Off.
2.
Application Controlled LED on, Battery Status LED on, WLAN Status LED on.
3.
screen to align the touch screen:
Confirm Calibration
Screen