Related Manuals for ExtremeWireless AP3912i
Summary of Contents for ExtremeWireless AP3912i
-
Page 1: Installation Guide
™ ExtremeWireless AP3912i Installation Guide 9035014-02 Rev-01 Published December 2016... - Page 2 Copyright © 2017 Extreme Networks, Inc. All rights reserved. Legal Notice Extreme Networks, Inc. reserves the right to make changes in specifications and other information contained in this document and its website without prior notice. The reader should in all cases consult representatives of Extreme Networks to determine whether any such changes have been made.
-
Page 3: Table Of Contents
Mounting the Bracket to a Junction or Gang Box....................13 Connecting the LAN/Power to the AP........................13 Mounting the AP to the Bracket...........................15 Appendix A: Specifications.....................16 Appendix B: Regulatory Information..................17 United States..................................17 Canada......................................19 European Community..............................20 Certifications of Other Countries..........................25 ExtremeWireless™ AP3912i Installation Guide... -
Page 4: Preface
When features, functionality, or operation is specific to a switch family, such as ExtremeSwitching ™ Summit ® , the family name is used. Explanations about features and operations that are the same across all product families simply refer to the product as the switch. ExtremeWireless™ AP3912i Installation Guide... -
Page 5: Providing Feedback To Us
The device history (for example, if you have returned the device before, or if this is a recurring problem) • Any related RMA (Return Material Authorization) numbers Related Publications ExtremeWireless and ExtremeWireless AP documentation can be found on the Extreme Documentation page at: http://documentation.extremenetworks.com ExtremeWireless User Guide is recommended. -
Page 6: Chapter 1: Overview
RTLS, availability, and mobility. • Is enabled for ExtremeCloud™ support. LED Indicators The AP3912i has six LED indicators. The LEDs provide status information on the current state of the AP3912i. For more information about LEDs, see the ExtremeWireless User Guide. - Page 7 Overview Figure 1: AP3912 LEDs Table 3: AP3912i LED Status Indicators Indicator Status Description 1 (Status) Green Indicates AP is working normally Amber System failure 2 (Ethernet link state) LAN Amber Indicates a valid 1Gbps Ethernet link Green Indicates a valid 10Mbps or 100Mbps Ethernet link ExtremeWireless™...
-
Page 8: Uplink And Power Connections
Overview Table 3: AP3912i LED Status Indicators (continued) Indicator Status Description 3 (Radio 1) Green Indicates Radio 1 is enabled 4 (Radio 2) Green Indicates Radio 2 is enabled 5 (PSE Client Port) Green Uplink AP port detects AF source... - Page 9 Figure 2: Ports and Reset Button Location The Reset button is located to the right of the power connections. (See the arrow in the previous figure.) Insert a straightened paperclip into the hole and depress the switch. ExtremeWireless™ AP3912i Installation Guide...
-
Page 10: Chapter 2: Installation Process
Mount the AP to the bracket. Verifying the Box Contents Before you install the AP3912i, make sure that you have all of the necessary parts. Verify that the box contains the following items: Table 5: AP3912i Box Contents Quantity... -
Page 11: Safety Guidelines
Installation Process Table 5: AP3912i Box Contents (continued) Quantity Item Flat-head wood screws Security Torx key (T10 size) Note You will also need to provide your own cable. 2 Perform a visual inspection of the AP for any signs of physical damage. Contact Extreme Networks if there are any signs of damage. - Page 12 Installation Process Figure 3: AP3912i Mounting Bracket Table 6: AP3912i Mounting Bracket Number Description AP mounting tabs Security Torx captive screw To mount the bracket to a wall: Using the mounting bracket as a guide, choose a location where it is feasible to place the AP’s center.
-
Page 13: Mounting The Bracket To A Junction Or Gang Box
Make sure that the wires are punched down professionally. Otherwise the LAN 1 link speed will be dropped to 100 Mbps, instead of 1000 Mbps. There are two standards for patch-panel cable pin-out. Please select the standard used by your facility. ExtremeWireless™ AP3912i Installation Guide... - Page 14 Pin 8: Brown For a T-568B Straight-Through Ethernet Cable, the pin colors are: • Pin 1: White-Orange • Pin 2: Orange • Pin 3: White-Green • Pin 4: Blue • Pin 5: White-Blue • Pin 6: Green ExtremeWireless™ AP3912i Installation Guide...
-
Page 15: Mounting The Ap To The Bracket
Line up the AP holes (marked with arrows in the following diagram) on the rear with the two "L" shaped angled tabs near the right side of the bracket (see figure). Figure 5: AP3912i Rear View 2 Insert the AP onto the tabs. -
Page 16: Appendix A: Specifications
Specifications This appendix lists the specifications for the ExtremeWireless™ Indoor Access Point AP3912i. Table 7: Specifications for the AP3912i Item Specification AP Part Number: 31025 WS-AP3912i-FCC AP Part Number: 31026 WS-AP3912i-ROW Enclosure material AP enclosure is not plenum rated. Power source Power is provided by Power-over-Ethernet (802.3at or... -
Page 17: Appendix B: Regulatory Information
This device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. USA Conformance Standards This equipment meets the following conformance standards: ExtremeWireless™ AP3912i Installation Guide... -
Page 18: Fcc Radiation Exposure Statement
AP3912i is connected. Any other installation or use of the product violates FCC Part 15 regulations. This Part 15 radio device operates on a non-interference basis with other devices operating at the same frequency when using the antennas provided or other Extreme Networks-certified antennas. -
Page 19: Canada
5 GHz frequency ranges. This device must not be co-located or operated in conjunction with any other antenna or transmitter. The radiated output power of the AP3912i is below the FCC radio frequency exposure limits as specified in “Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields”... -
Page 20: European Community
This product complies with the requirements of Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. ExtremeWireless™ AP3912i Installation Guide... -
Page 21: Declaration Of Conformity In Languages Of The European Community
The AP3912i is intended for indoor use and must be installed in a proper indoor location. Contact local Authority for procedure to follow and regulatory information. For more details on legal combinations of frequencies, power levels and antennas, contact Extreme Networks. -
Page 22: New Member States Requirements Of Declaration Of Conformity
FCC Subpart C 15.247 • FCC Subpart E 15.407 • RSS-247 • ICES-003 • EN 301 893 • EN 300 328 • EN 301 489 1 & 17 • EN 60601-1-2 • EN 50385 • EN 55022 (CISPR 22) ExtremeWireless™ AP3912i Installation Guide... - Page 23 The AP configured with approved internal or external antennas can be used for indoor and outdoor transmissions throughout the European community as displayed in the following table. Some restrictions apply in Belgium, France, Greece, and Italy. ExtremeWireless™ AP3912i Installation Guide...
- Page 24 Indoor or outdoor Spain Indoor only Indoor only Indoor or outdoor Indoor or outdoor Sweden Indoor only Indoor only Indoor or outdoor Indoor or outdoor Switzerland Indoor only Indoor only Indoor or outdoor Indoor or outdoor ExtremeWireless™ AP3912i Installation Guide...
-
Page 25: Certifications Of Other Countries
Other Country Specific Compliance Standards, Approvals and Declarations • IEC 60950-1 CB Scheme Report and Certificate • EN 60950-1 To be included in CB Scheme report • UL 60950-1 • CSA 22.2 No.60950-1-03 • AS/NZS 60950.1 To be included in CB Scheme Report ExtremeWireless™ AP3912i Installation Guide... - Page 26 Regulatory Information ExtremeWireless™ AP3912i Installation Guide...
- Page 27 Regulatory Information NCC Statement ExtremeWireless™ AP3912i Installation Guide...
Need help?
Do you have a question about the AP3912i and is the answer not in the manual?
Questions and answers